0.02 To 1Mm 17 Blade Thickness Gap Metric Filler Feeler Gauge Measure Tool ,Easy to Use

<p>The gauge contains 17 blades, all made of carbon steel</p><p>Blades from 0.02mm to 1.00mm</p><p>Blade Thickness:</p><p>0,02, 0,03, 0,04, 0,05, 0,06, 0,07, 0,08, 0,09, 0,1, 0,15, 0,2, 0,25, 0, 3, 0,4, 0,5, 0,75, 1,0</p><p>Dimensions: about 107×13×8mm</p><p>Weight: 45g/pc</p><p>Material: Stainless steel</p><p>Package includes:</p><p>2 x feeler gauges</p><p>Note: Light shooting and different monitors may cause the item color in the picture to be slightly different from the real one. The measurement allowable error is +/-1-3cm.</p><p>Related Products:feeler gauges,feeler gauge,feeler gauge set,filler gauge,gauge set,filler gauge set,feeler guage,angle gauge,thickness gauge,Gap Tool,taper gauge,ruler,layout tools,spark plug gap tool</p>

• The sheet gauge for measuring the gap is a gauge composed of a group of thin steel sheets with different thickness steps. Feeler gauges are used to measure gap dimensions.
• When checking whether the measured size is qualified, the inspector can according to the degree of tightness of the feeler gauge and the surface to be tested.
• Feeler gauge, also known as micrometer or thickness gauge, is one of the measuring instruments used to check the gap. The cross section is a right triangle with a scale on the hypotenuse. The length of the short side is directly expressed on the hypotenuse by using the acute angle sine. In this way, the size of the seam can be read directly.
• Dirt and dust must first be removed from the feeler gauge and workpiece. When using, one or several pieces can be overlapped and inserted into the gap, and it is better to feel a little lag. When measuring, the action should be light, and hard insertion is not allowed.
• It is also not allowed to measure parts with higher temperature. It is also not allowed to measure parts with higher temperature.